Gravel Stabilisation System

Polypropylene sheets with an alveolar structure, similar to a bee panel. The lower part is heat soldered to a porous Geotextile that stops weeds taking root and allows water to pass through preventing pool formation

Application:To create gravel paths or roads in transit areas, as much for people as for vehicles. These panels allow flat and stable surfaces to be created. They
are flexible, light and allow the path/road to be laid quickly, including on slopes with a 45º incline

Instructions for use:Prepare the ground so it is flat. Place the panels directly on it or on Weed control Fabric. Next, fill it with gravel, covering the 4 cm of panel and flatten. Finally, spread a 1 cm thick layer over it so the panels are invisible

Sizes Availables: Height 30 and 40 mm

• 1,20×1,60×0,04 m
• 1,20×1,60×0,03 m

Supply:

• Height 30 mm: Units and pallet (123 sheets /pallet)
• Height 40 mm: Units and pallet (93 sheets /pallet)